Item price and sale per piece

Telescopic slides Series 010, hot-dip galvanized steel, width 10 mm , partial extension with center detent

• Partial extension slide
• Load capacity up to 15 kg per pair
• Extendable on both sides with center detent
• Length: 340 mm
• Pull-out travel: 260 mm on both sides
• Hole pattern outer rail: 2 x M4 thread (58 – 224 mm)
• Hole pattern inner rail: 3 x hole D 6 mm (42 – 128 – 128 mm)

Material:

• Rails made of hot-dip galvanized steel
• Ball cages made of plastic
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature 10 C to 40 C (50 F to 104 F)
• Storage and transport temperature -20 C to max. 80 C (50 F to 176 F)

Notes: The center detent fixes extendable runners on both sides in closed position. The indicated load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all provided mounting positions. Mounting vertically with side recesses on the drawer front or horizontally with shadow gap under the drawer. The load capacity for horizontal mounting is approx. 60% less than for vertical mounting.

Der Beitrag Telescopic slide partial extension 010 | up to 25 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Item price and sale per piece

Telescopic slides Series 010, hot-dip galvanized steel, width 10 mm, partial extension with center detent

• Partial extension slide
• Load capacity up to 15 kg per pair
• Extendable on both sides with center detent
• Length: 402 mm
• Extension path: 292 mm on both sides
• Hole pattern outer rail: 2 x countersunk hole 90 D 5.1 x 7.4 mm (10 – 360 mm)
• Hole pattern inner rail: 2 x countersunk hole 90 D 5.1 x 7.4 mm (5 – 391.5 mm)

Material:

• Rails made of hot-dip galvanized steel
• Ball cages made of plastic
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature 10 C to 40 C
• Storage and transport temperature -20 C to max. 80 C

Notes:The center detent fixes extendable guides on both sides in closed position.The indicated load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all provided mounting positions.Mounting vertically with side recesses on the drawer front or horizontally with shadow gap under the drawer. The load capacity for horizontal mounting is approx. 60% less than for vertical mounting.

Der Beitrag Telescopic slide partial extension 010 | up to 25 kg | Length 402 mm | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Article price and sale per piece

Article No. Schock 016.06330Z – 016.06339Z

Telescopic slides series 016, hot-dip galvanized steel, width 9,5 mm, partial extension, separable, up to 56 kg at 100.000 cycles

Description:

• Partial extension
• Load capacity up to 56 kg per pair
• End stop closed
• Force-locking latch open
• Separable inner rail

Material:

• Rails made of galvanized and blue passivated steel
• Ball cages made of galvanized steel
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature 10 C to 40 C
• Storage and transport temperature -20 C to max. 80 C

Notes: The end stop stops the ball guide in the closed position. The force locking detent fixes the guide with defined force in the open position. The separable inner rail allows the inner rail profile to be released by operating a latch. This allows separate mounting of the inner rail to the movable module. The specified load capacities are maximum values for a vertically mounted pair of telescopic rails with even load distribution when using all provided mounting positions.

Der Beitrag Telescopic slide partial extension 016 | up to 65 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Functions:

• Lock-out
• Disconnect

Schock telescopic slide Partial extension Series 016

The Schock telescopic slide Partial extension Series 016 is the ideal solution for a wide range
of applications where ease of use and seamless accessibility
are essential.

With dimensions of 9.5 x 35.2 mm (w/h) and available lengths from 305 mm to 711 mm,
they offer exceptional flexibility and adaptability for various projects.

These Partial extensions come with a comprehensive range of useful functions,
including a lock-out and a disconnect.

These functions not only ensure safe handling but also provide
comfortable and reliable use.

The Schock Partial extension telescopic slides of Series 016 are versatile,
as they are suitable for both vertical and horizontal mounting. This enables
their seamless integration into a wide range of projects.

Technical Data:

• Load capacity up to 50 kg/pair at 10,000 cycles

Material:

• Rails made of galvanized steel (ZM100)
• Ball cages made of galvanized steel (ZM70)
• Balls made of hardened C-steel

Temperature Range:

• Operating temperature: -20 C to +70 C
• Operating temperature with Soft-Close: +10 C to +40 C

Notes:

The specified load capacities are maximum values for a vertically mounted
telescopic slide pair with even load distribution using all designated
mounting positions.

WARNING: In case of flat mounting , the load capacity is reduced by up to 75%.

Der Beitrag Telescopic slide partial extension Series 016 | Lock-out/Disconnect | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Functions:

• Extendable on both sides

Schock telescopic slide Partial extension Series 017

The Schock telescopic slide Partial extension Series 017 is the ideal solution for a wide range
of applications where ease of use and seamless accessibility
are essential.

With dimensions of 10.0 x 17.0 mm (w/h) and available lengths from 182 mm to 374 mm,
they offer exceptional flexibility and adaptability for various projects.

These Partial extensions come with a useful function,
extendable on both sides.

These functions not only ensure safe handling but also provide
comfortable and reliable use.

The Schock Partial extension telescopic slides of Series 017 are versatile,
as they are suitable for both vertical and horizontal mounting. This enables
their seamless integration into a wide range of projects.

Technical Data:

• Load capacity up to 15 kg/pair at 10,000 cycles

Material:

• Rails made of galvanized steel (ZM100)
• Ball cages made of galvanized steel (ZM70)
• Balls made of hardened C-steel

Temperature Range:

• Operating temperature: -20 C to +70 C
• Operating temperature with Soft-Close: +10 C to +40 C

Notes:

The specified load capacities are maximum values for a vertically mounted
telescopic slide pair with even load distribution using all designated
mounting positions.

WARNING: In case of flat mounting , the load capacity is reduced by up to 75%.

Der Beitrag Telescopic slide partial extension Series 017 | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Functions:

• Hold-in
• Hold-out
• Air Motion smooth-running ball mix

Schock telescopic slides partial extension series 010

The Schock telescopic slide partial extension series 010 is the ideal solution for a wide range of applications where easy handling and accessibility are crucial.

With dimensions of 10.0 x 27.2 mm (w/h) and available lengths from 250 mm to 500 mm they offer exceptional flexibility and adaptability for a wide range of projects.

These pull-outs have a comprehensive range of useful functions:

• Hold-in
• Hold-out
• Air Motion Smooth running – our patented ball mix of metal and plastic balls

These functions not only ensure safe handling, but also convenient and reliable use.

The Schock partial extension telescopic slides of the 010 series are versatile, as they are suitable for both vertical and horizontal installation. This allows them to be easily integrated into a wide range of projects.

Technical data:

• Load capacity:Up to 20 kg/pair with 10,000 cycles

Material:

• Rails made of galvanized steel (ZM100)
• Ball cages made of galvanized steel (ZM70)
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature: -20 C to +70 C
• Operating temperature with damped solf-closing mechanism: +10 C to +40 C

Notes:

The specified load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all intended fixing positions.

ATTENTION: When mounted flat (horizontally), the load capacity is reduced by up to 75%.

Der Beitrag Telescopic slide partial extension Series 010 | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

The OWS-30 is a robust telescopic slide with partial extension, developed to maximize load capacity in a compact space. It is especially suitable for heavy-duty seats in trains and military use, but also for a variety of applications where torsional rigidity is of utmost importance.

Extension: 50%
Material: Steel C45 E + C
Length: 150 mm to 1000 mm
Cross-section: 11 x 30 mm
Travel: 75 mm to 500 mm
Load capacity: up to 280 kg/pair
Operating temperature: -40 to +200 C

This is a 50% extension slide for heavy loads. Made from cold-drawn steel profiles and precision-milled ball bearing tracks, the OWS-30 telescopic slide offers good shock and vibration resistance when supporting a static load in the closed position. Accordingly, this slide is well-suited for installation on vehicles. The telescopic slide, made from solid steel profiles, offers a low overall height for its high load capacity. In the extended position, the slide is also very resistant to applied loads, making it an excellent choice for dynamic applications and manually operated systems.

The OWST version of this slide is equipped with a front and rear extension equal to the closed length.

Load capacities:
The telescopic slides offer a high level of load capacity and compact dimensions. The maximum load capacity is specified for fully extended slide pairs, installed in the main axis direction, with the load evenly distributed over the inner slide.

Note:
Since these telescopic slides are specially produced for you after the order is placed, they are excluded from return. The slides are secured during transport with high-quality wooden packaging.

Der Beitrag Telescopic slide partial extension OWS-30 | up to 280 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

The SOWST-50 is a rugged slide with an extension front and rear, equal to the closed length, which has been designed for load maximisation from a small space envelope, manufactured from marine grade 316L (1.4404) stainless steel offering a very high corrosion resistance. The austenitic structure of 316L stainless gives excellent toughness, even at cryogenic temperatures. The beams are polished to a bright finish on all surface areas as standard.

Extension: 50%
Material: Stainless Steel 316L (1.4404)
Length: 200 mm to 2000 mm
Cross-section: 16 x 50 mm
Travel distance: 200 mm to 2000 mm
Load capacity: up to 400 kg/pair
Operating temperature: -40 to +200 C

The SOWST-50 is particularly suited for highly corrosive applications with prolonged exposure to the elements. Having a compact 50mm profile, this makes it an excellent choice for heavy duty marine seating or military/emergency truck drawers which operate in wet conditions. This is an extreme load/duty front and rear extension telescopic slide (60Kg 400Kg/pair) suitable for a wide range of applications.

Constructed from milled stainless steel 316L sections, with machined ball tracks for accuracy, it has excellent levels of shock and vibration resistance. Accordingly, the product is well suited to supporting marine seating/hatches and food grade machine guards. The beams and ball bearings are manufactured from austenitic grade 316L. End stop bolts are grade 304 with cages made from ferritic grade 430 stainless, for complete corrosion protection.

This slide is robust to applied loads when in the extended position, making it an excellent choice for dynamic applications, unlike many other slides manufactured from rolled steel C sections. There are no plastic parts in the manufacture of this range, making it ideal for high temperature use.

Load capacities:
The telescopic slides offer a high level of load capacity with compact dimensions. The maximum load is specified on fully extended pairs of slides installed along the major axis, with the load evenly distributed over the inner beam.

Note:
As these telescopic slides are custom-made upon order, they are excluded from returns. The slides are secured with premium wood packaging for transport.

Der Beitrag Telescopic Slide partial extension SOWST-50 | up to 400 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

The SOWST-40 is a telescopic slide with an extension front and rear, equal to the closed length, which has been designed for load maximisation from a small space envelope, manufactured from marine grade 316L (1.4404) stainless steel offering a very high corrosion resistance. The austenitic structure of 316L stainless gives excellent toughness, even at cryogenic temperatures. The beams are polished to a bright finish on all surface areas as standard.

Extension: 50%
Material: Stainless Steel 316L (1.4404)
Length: 200 mm to 1600 mm
Cross-section: 16 x 40 mm
Travel distance: 200 mm to 1600 mm
Load capacity: up to 280 kg/pair
Operating temperature: -40 to +200 C

The SOWST-40 is particularly suited for highly corrosive applications with prolonged exposure to the elements. Having a compact 40mm profile, this makes it an excellent choice for heavy duty marine seating or military/emergency truck drawers which operate in wet conditions. This is an extreme load/duty front and rear extension telescopic slide (40Kg 280Kg/pair) suitable for a wide range of applications.

Constructed from milled stainless steel 316L sections, with machined ball tracks for accuracy, it has excellent levels of shock and vibration resistance. Accordingly, the product is well suited to supporting marine seating/hatches and food grade machine guards. The beams and ball bearings are manufactured from austenitic grade 316L. End stop bolts are grade 304 with cages made from ferritic grade 430 stainless, for complete corrosion protection.

This slide is robust to applied loads when in the extended position, making it an excellent choice for dynamic applications, unlike many other slides manufactured from rolled steel C sections. There are no plastic parts in the manufacture of this range, making it ideal for high temperature use.

Load capacities:
The telescopic slides offer a high level of load capacity with compact dimensions. The maximum load is specified on fully extended pairs of slides installed along the major axis, with the load evenly distributed over the inner beam.

Note:
As these telescopic slides are custom-made upon order, they are excluded from returns. The slides are secured with premium wood packaging for transport.

Der Beitrag Telescopic Slide partial extension SOWST-40 | up to 280 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

The SOWS-50 telescopic slide is manufactured from marine grade 316L (1.4404) stainless steel offering a very high corrosion resistance. The austenitic structure of 316L stainless gives excellent toughness, even at cryogenic temperatures. The beams are electrostatically polished to a bright finish on all surface areas as standard.

Extension: 50%
Material: Stainless Steel 316L (1.4404)
Length: 200 mm to 2000 mm
Cross-section: 17 x 50 mm
Travel distance: 100 mm to 1000 mm
Load capacity: up to 400 kg/pair
Operating temperature: -40 to +200 C

The SOWS-50 is particularly suited for highly corrosive applications with prolonged exposure to the elements. Having a compact 50mm profile, this makes it an excellent choice for heavy-duty marine seating or military/emergency truck drawers which operate in wet conditions. This is an extreme load/duty partial extension telescopic slide (70Kg 400Kg/pair) suitable for a wide range of applications.

Constructed from milled stainless steel sections, with machined ball tracks for accuracy, it has excellent levels of shock and vibration resistance. Accordingly, the product is well suited to supporting marine seating/hatches and food-grade machine guards. The beams and ball bearings are manufactured from austenitic grade 316L. End stop bolts are grade 304 with cages made from ferritic grade 430 stainless, for complete corrosion protection.

This slide is robust to applied loads when in the extended position, making it an excellent choice for dynamic applications, unlike many other slides manufactured from rolled steel C sections. There are no plastic parts in the manufacture of this range, making it ideal for high-temperature use.

Load capacities:
The telescopic slides offer a high level of load capacity with compact dimensions. The maximum load is specified on fully extended pairs of slides installed along the major axis, with the load evenly distributed over the inner beam.

Note:
As these telescopic slides are custom-made upon order, they are excluded from returns. The slides are secured with premium wood packaging for transport.

Der Beitrag Telescopic Slide partial extension SOWS-50 | up to 400 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.