Item price and sale per piece

Telescopic slides Series 010, hot-dip galvanized steel, width 10 mm , partial extension with center detent

• Partial extension slide
• Load capacity up to 15 kg per pair
• Extendable on both sides with center detent
• Length: 340 mm
• Pull-out travel: 260 mm on both sides
• Hole pattern outer rail: 2 x M4 thread (58 – 224 mm)
• Hole pattern inner rail: 3 x hole D 6 mm (42 – 128 – 128 mm)

Material:

• Rails made of hot-dip galvanized steel
• Ball cages made of plastic
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature 10 C to 40 C (50 F to 104 F)
• Storage and transport temperature -20 C to max. 80 C (50 F to 176 F)

Notes: The center detent fixes extendable runners on both sides in closed position. The indicated load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all provided mounting positions. Mounting vertically with side recesses on the drawer front or horizontally with shadow gap under the drawer. The load capacity for horizontal mounting is approx. 60% less than for vertical mounting.

Der Beitrag Telescopic slide partial extension 010 | up to 25 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Item price and sale per piece

Telescopic slides Series 010, hot-dip galvanized steel, width 10 mm, partial extension with center detent

• Partial extension slide
• Load capacity up to 15 kg per pair
• Extendable on both sides with center detent
• Length: 402 mm
• Extension path: 292 mm on both sides
• Hole pattern outer rail: 2 x countersunk hole 90 D 5.1 x 7.4 mm (10 – 360 mm)
• Hole pattern inner rail: 2 x countersunk hole 90 D 5.1 x 7.4 mm (5 – 391.5 mm)

Material:

• Rails made of hot-dip galvanized steel
• Ball cages made of plastic
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature 10 C to 40 C
• Storage and transport temperature -20 C to max. 80 C

Notes:The center detent fixes extendable guides on both sides in closed position.The indicated load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all provided mounting positions.Mounting vertically with side recesses on the drawer front or horizontally with shadow gap under the drawer. The load capacity for horizontal mounting is approx. 60% less than for vertical mounting.

Der Beitrag Telescopic slide partial extension 010 | up to 25 kg | Length 402 mm | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Extension: 200%
Material: Stainless steel 316L (1.4404)
Length: 300 mm to 1600 mm
Cross-section: 64 x 70 mm
Extension path: 600 mm to 3200 mm
Load capacity: up to 130 kg/pair
Operating temperature: -40 to +200 C

The stainless steel telescopic slides of the SDDTS series are characterized by high precision and excellent shock and vibration resistance. The movable I-beams make the telescopic slides robust against loads in the extended state. This makes them ideal for dynamic applications with high loads and torques while minimizing deflection.

Applications include military truck drawers, offshore storage, and splash water environments aboard ships. The use of stainless steel ensures corrosion resistance.

The telescopic slides of the SDDTS series are made without any plastic components and are therefore suitable for use at extreme temperatures. Due to the materials used, these slides have a low electromagnetic signature, making them ideal for defense applications.

Additional variants for special applications can be produced with alternative closed lengths, extensions, mounting systems, surface treatments, and bearings.

Load Capacities:
The telescopic slides offer high load capacity and compact dimensions. The maximum load capacity is specified for fully extended slide pairs installed in the main axis direction, with the load evenly distributed over the inner slide.

Note:
As these telescopic slides are custom-made for you upon order, they are excluded from returns. The slides are securely delivered with high-quality wooden packaging.

Der Beitrag Telescopic slide over extension SDDTS-70 | up to 130 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

The DDTS telescopic slides offer a standard 200% extension. By using high-load I-beams, the guide maintains stiffness in demanding applications where the travel distance exceeds the closed length by twice as much.

Extension: 200%
Material: Steel C45 E + C
Length: 150 mm to 1000 mm
Cross-section: 26 x 40 mm
Extension Path: 300 mm to 2000 mm
Load Capacity: up to 80 kg/pair
Operating Temperature: -40 to +200 C

The ball-bearing telescopic rail made of 5 cold-drawn steel profiles is characterized by high precision and excellent shock and vibration resistance when carrying a static load in the closed position. Therefore, the rail is well-suited for installation in vehicles and trains. The telescopic rail is designed in the proven I-beam format, offering high load capacity with a low overall height.

Even in the extended state, this rail is very robust and is therefore ideal for dynamic applications with high loads and torques with minimal deflection. Further variants can be manufactured with alternative closed lengths, extensions, mounting systems, surface treatments, and ball bearings.

The rails are made of cold-drawn steel C45E+C according to EN 10277. The standard ball cages are made of galvanized sheet metal, and the ball bearings are made of carbon steel C85 G100 according to DIN 5401.

Load Capacities:
The telescopic rails offer a high level of load capacity and compact dimensions. The maximum load capacity is specified for fully extended rail pairs installed along the main axis direction, with the load evenly distributed over the inner rail.

Note:
Since these telescopic rails are specially produced for you after the order is placed, they are excluded from returns. The rails are secured with high-quality wooden packaging during transport.

Der Beitrag Telescopic Slide over extension DDTS-45 | up to 80 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

The DDTS range of slides offer a super extension of 200% as standard. Utilising heavy duty I beams the slide can maintain rigidity in demanding applications where the travel exceeds the closed length by a factor of two.

Extension: 200%
Material: Steel C45E+C
Length: 150 mm to 1000 mm
Cross-section: 36 x 35 mm
Travel distance: 300 mm to 2000 mm
Load capacity: up to 100 kg/pair
Operating temperature: -40 to +200 C

The DDTS-35 slide with a closed length of 350mm has a travel of 750mm (1050mm overall) has a loading of 100kg per pair. Constructed from 5 cold drawn steel sections this full action ball bearing slide has high precision and excellent level of resistance to shock and vibration when supporting a static load in the closed position. Accordingly, the slide is well suited to mounting on vehicles and trains. Constructed in the tried and tested I beam format, this telescopic slide offers a low overall slide height for its high load capacity.

This slide also has good resistance to applied loads when in the extended position making it an excellent choice for dynamic applications subject to high loads and torque with minimal deflection. Additional variations may be produced with alternative closed lengths, extensions, mounting systems, surface treatments, and ball bearings.

The slides are manufactured from cold drawn steel C45E+C in accordance with EN 10277. Standard ball cages are manufactured from zinc plated sheet metal, and the ball bearings are carbon steel C85 G100 in accordance with DIN 5401.

Load capacities:
The telescopic slides offer a high level of load capacity with compact dimensions. The maximum load is specified on fully extended pairs of slides installed along the major axis, with the load evenly distributed over the inner beam.

Note:
As these telescopic slides are custom-made upon order, they are excluded from returns. The slides are secured with premium wood packaging for transport.

Der Beitrag Telescopic Slide over extension DDTS-35 | up to 100 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Article price and sale per piece

Article No. Schock 010.17361, 010.17364, 010.17367, 010.17369

Telescopic slides series 010, hot-dip galvanized steel, width 10 mm, partial extension, up to 15 kg at 100.000 cycles

Description:

• Partial extension
• Load capacity up to 15 kg per pair
• Extendable on both sides

Material:

• Rails made of hot-dip galvanized steel
• Ball cages made of plastic
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature 10 C to 40 C
• Storage and transport temperature -20 C to max. 80 C

Notes:Telescopic slides extendable on both sides are suitable for different drawer depths.The specified load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all provided mounting positions.

Der Beitrag Telescopic slide partial extension 010 | up to 25 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Item price and sale per piece

Telescopic slides Series 010, hot-dip galvanized steel, width 10 mm, partial-extension with center detent

• Partial-extension
• Load capacity up to 15 kg per pair
• Extendable on both sides with center detent
• Length: 340 mm
• Extension length: 260 mm on both sides
• Hole pattern outer rail: 2 x M4 threads (58 – 224 mm)
• Hole pattern inner rail: 3 x holes D 6 mm (42 – 128 – 128 mm)

Material:

• Rails made of hot-dip galvanized steel
• Ball cages made of plastic
• Balls made of hardened C-steel

Temperature Range:

• Operating temperature +10°C to +40°C
• Storage and transport temperature -20°C to max. +80°C

Notes:

The center detent secures the guides extendable on both sides in the closed position.

The specified load capacities are maximum values for a vertically mounted telescopic slide pair with even load distribution using all designated mounting positions.

Mounting is vertical with side cutouts at the front of the drawer or horizontal with a shadow gap under the drawer. The load capacity in horizontal mounting is approximately 60% lower than in vertical mounting.

Der Beitrag Telescopic slide partial extension 010 | up to 100 kg | Extendable in both sides | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.