The telescopic slides of the ADTSB series offer extension in both directions.
Due to the construction of the guide elements from solid material, the slides can be manufactured in almost any desired aluminum.

Extension: 100%, extendable on both sides
Material: Aluminum EN-AW 6082 T6
Length: 200 mm to 2000 mm
Cross-section: 32 x 70 mm
Extension length: 200 mm to 2000 mm
Load capacity: up to 330 kg/pair
Operating temperature: -40 to +200 C

The aluminum telescopic slides of the ADTSB series are smooth and precise full-extension slides.
Due to their light weight, the slides are ideal for military and airborne applications. Additionally, the slides are used for defense applications at sea and in the air.
With anodized surfaces and the use of stainless steel bearings, cages, and end stops, the slides are corrosion-resistant. Additional surface finishes can be selected upon request.
The ADTSB telescopic slides are limited to operating speeds of <0.3m/s. Therefore, we do not recommend these telescopic slides for precise robotic pick-and-place or high-speed shuttles.

Load Capacities:
The telescopic slides offer high load capacity and compact dimensions. The maximum load capacity is specified for fully extended slide pairs installed in the main axis direction and whose load is evenly distributed over the inner slide.

Note:
As these telescopic slides are custom-made to order, they are excluded from returns. The slides are secured with high-quality wooden packaging during transport.

Der Beitrag Telescopic slide full extension ADTSB-70 | up to 330 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

The telescopic slides of the ADTSB series offer extension in both directions.
Due to the construction of the guide elements from solid material, the slides can be manufactured in almost any desired aluminum.

Extension: 100%, extendable on both sides
Material: Aluminum EN-AW 6082 T6
Length: 200 mm to 1600 mm
Cross-section: 30 x 50 mm
Extension length: 200 mm to 1600 mm
Load capacity: up to 180 kg/pair
Operating temperature: -40 to +200 C

The aluminum telescopic slides of the ADTSB series are smooth and precise full-extension slides.
Due to their light weight, the slides are ideal for military and airborne applications.
With anodized surfaces and the use of stainless steel bearings, cages, and end stops, the slides are corrosion-resistant. Additional surface finishes can be selected upon request.
The ADTSB telescopic slides are limited to operating speeds of <0.3m/s. Therefore, we do not recommend these telescopic slides for precise robotic pick-and-place or high-speed shuttles.

Load Capacities:
The telescopic slides offer high load capacity and compact dimensions. The maximum load capacity is specified for fully extended slide pairs installed in the main axis direction and whose load is evenly distributed over the inner slide.

Note:
As these telescopic slides are custom-made to order, they are excluded from returns. The slides are secured with high-quality wooden packaging during transport.

Der Beitrag Telescopic slide full extension ADTSB-50 | up to 180 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

This is a high quality, smooth, full extension slide with milled ball tracks for accuracy and a slight pre-load. There is a choice of surface finishes available. The bearings, cages and end stops are stainless steel, providing a corrosion resistant slide.

The low weight ADTSB-40 slide has a loading of 125kg at 600mm. The slide is designed for full travel front and rear. This is facilitated by an internal rocker system which holds and releases beams in sequence. The first beam will extend fully and only at that point will the second beam be released.

We do not recommend standard ADTSB slides on accurate robotic pick & place or high speed shuttles, without factory adaptation and customer in situ testing, prior to committing to production. The slides are limited to operational speeds of <0.3m/s.

Strengthened by the mobile I beam which allows a very compact design to be used on applications such as aircraft seating and bi-directional drawers where normally only a two-beam slide would fit. Supplied with a standard anodization. Please consult our engineers for other surface finishes available. A single ADTSB-40 weighs 2.23kg per metre.

Der Beitrag Telescopic slide full extension ADTSB-40 | up to 125 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.