Der Beitrag Telescopic slide over-extension 037 | up to 100 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Der Beitrag Telescopic slide over-extension 042 | up to 12 kg | length 246 mm | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Der Beitrag Full extension tall cabinet for wire basket solutions | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Item price and sale per piece

Telescopic slides Series 010, hot-dip galvanized steel, width 10 mm , partial extension with center detent

• Partial extension slide
• Load capacity up to 15 kg per pair
• Extendable on both sides with center detent
• Length: 340 mm
• Pull-out travel: 260 mm on both sides
• Hole pattern outer rail: 2 x M4 thread (58 – 224 mm)
• Hole pattern inner rail: 3 x hole D 6 mm (42 – 128 – 128 mm)

Material:

• Rails made of hot-dip galvanized steel
• Ball cages made of plastic
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature 10 C to 40 C (50 F to 104 F)
• Storage and transport temperature -20 C to max. 80 C (50 F to 176 F)

Notes: The center detent fixes extendable runners on both sides in closed position. The indicated load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all provided mounting positions. Mounting vertically with side recesses on the drawer front or horizontally with shadow gap under the drawer. The load capacity for horizontal mounting is approx. 60% less than for vertical mounting.

Der Beitrag Telescopic slide partial extension 010 | up to 25 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Item price and sale per piece

Telescopic slides Series 010, hot-dip galvanized steel, width 10 mm, partial extension with center detent

• Partial extension slide
• Load capacity up to 15 kg per pair
• Extendable on both sides with center detent
• Length: 402 mm
• Extension path: 292 mm on both sides
• Hole pattern outer rail: 2 x countersunk hole 90 D 5.1 x 7.4 mm (10 – 360 mm)
• Hole pattern inner rail: 2 x countersunk hole 90 D 5.1 x 7.4 mm (5 – 391.5 mm)

Material:

• Rails made of hot-dip galvanized steel
• Ball cages made of plastic
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature 10 C to 40 C
• Storage and transport temperature -20 C to max. 80 C

Notes:The center detent fixes extendable guides on both sides in closed position.The indicated load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all provided mounting positions.Mounting vertically with side recesses on the drawer front or horizontally with shadow gap under the drawer. The load capacity for horizontal mounting is approx. 60% less than for vertical mounting.

Der Beitrag Telescopic slide partial extension 010 | up to 25 kg | Length 402 mm | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Article price and sale per piece

Article No. Schock 037.06807

Telescopic slideseries 037, hot-dip galvanized steel, width 16 mm, full extension 1100 mm, up to 90 kg/pair

Telescopic slide SM-037L

• Full extension
• Load capacity up to 90 kg per pair
• Special length 1100 mm
• Locking device

Material:

• Rails made of hot-dip galvanized steel
• Ball cages made of galvanized steel
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature 10 C to 40 C
• Storage and transport temperature -20 C to max. 80 C

Notes:The locking device fixes the guide in the closed position.The specified load capacities are maximum values for a vertically mounted pair of telescopic slides with uniform load distribution when all the intended fastening positions are used.In typical applications for particularly long telescopic slides, for example in transport systems and load carriers, additional external stops as well as external locking systems are absolutely necessary to ensure safe operation or transport due to the extreme load requirements.

Der Beitrag Telescopic slide full extension 037 | up to 90 kg | length 1100 mm | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Item price and sale per piece

Schock standard program: Article No. 040.17474

Article group: Telescopic slide series 040, steel, width 20 mm, over-extension, up to 20 kg at 100.000 cycles

Description:

• Full extension with over-extension
• Load capacity up to 30 kg per pair
• Extendable on both sides

Material: Slides made of hot-dip galvanized steel Ball cages made of plastic Balls made of hardened carbon steel Temperature range: Operating temperature 10 C to 40 CStorage and transport temperature -20 C to max. 80 C Notes: Telescopic slides extendable on both sides are suitable for different drawer depths. The specified load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all provided mounting positions.

Der Beitrag Telescopic slide over extension 040 | up to 30 kg | length 310 mm | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Item price and sale per piece. One pair = 2 pieces.

Article No. 038.11710

Telescopic slide series 038, steel, width 17.5 mm, full extension 1500 mm, up to 50kg

Description:

• Full extension
• Load capacity up to 50 kg per pair at 10.000 cycles
• Special length 1500 mm
• Locking device

Material: Rails made of hot-dip galvanized steel ball cages made of galvanized steel balls made of hardened carbon steel temperature range: Operating temperature 10 C to 40 C Storage and transport temperature -20 C to max. 80 C Notes: The locking device fixes the guide in the closed position. The specified load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all the provided fastening positions. In typical applications for particularly long telescopic slides, for example in transport systems and load carriers, additional external stops and external locking systems are absolutely necessary to ensure safe operation or transport due to the extreme load requirements.

Der Beitrag Telescopic slide full extension 038 | up to 100 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

The telescopic slides are manufactured by milling from cold drawn material of quality C45E + C according to EN 10277.
The standard ball cages are made of galvanized sheet metal.
Carbon steel C85, G100 according to DIN 5401 are used as standard balls.

Tolerances:

The general manufacturing tolerances of telescopic slides are in accordance with js13 standard for bores and linear dimensions. Straightness is 1 mm/m and twist is 1 degree/m.

Standard surface treatment is an electrolytic zinc coating according to ISO 2081, which confirms the European RoHS regulation with a zinc coating of at least 8 and an average of 12 microns.

A yellow zinc coating is also available on request.

Operating temperatures:

Standard working temperatures are between -30 and + 110 degrees C. Beyond this temperature range, special adjustments should be made to ensure smooth operation ,e.g. the use of specific grease for high or low temperatures.

Load capacities:

The telescopic slides offer a high degree of load capacity and compact dimensions. The maximum load capacity is given on fully extended pairs of slides, installed in the main axis direction and with the load evenly distributed over the inner slide.

The load capacities per pair indicated in this catalog include such a high safety margin that the rails are suitable for multiple applications. The safe working load depends on the extension, the type of carriage and mounting, and the frequency of use/number of cycles. This means that a longer extension limits the safe load. When mounting the slides in secondary axis arrangement, the safe working load is reduced by approx. 40% depending on the slide.

Installation:

In our product sketches and family tables you will find the most important dimensions including drilling diagrams.

Maintenance:

The rail design allows for minimal maintenance operation in most environments, with only extreme operating conditions requiring additional maintenance.

Mounting in dirty environments:

The telescopic slides are supplied without protection against dust. There is a risk that the presence of contaminants in the rails will quickly cause jamming or premature wear of the rail components. Therefore, it is important to provide mounting in a largely dust and particle free environment. Otherwise, the user must provide external measures for protection.

Deflection:

Deflection is an elastic deformation measured in mm when the rails are uniformly loaded, fully extended and mounted on the main axis.
When mounted on the secondary axis, the deflection is increased.
The maximum deflection of the telescopic slides is 1% of the closed length.

Speeds:

The limits of the speed is determined by the mass of the intermediate element that must be pulled by the moving element. The speed decreases as the length of the carriage increases. The recommended speed of use of the telescopic slides is 0.3 m / s.

Rules for good assembly
1. Make sure that the slides are parallel and mounted on the main axis.
2. Use all supplied mounting options on the rail.
3. Make sure that the mounting surfaces are flat and level.
4. Apply evenly distributed load.
5. Aligning the fronts of the slides

Following the mounting rules will ensure that the slides run smoothly and evenly, and that they have an optimum service life.
When mounting on the secondary axis, the load capacity is reduced by 40% compared to the basic load.

The telescopic slides cannot be used for vertical mounting (up and down), overhang, excessive heat, corrosive environment or dust.

Maintenance and Lubrication:

The telescopic slides are supplied with a light lubrication, additional grease can be added if required to allow optimum life.
Under normal working conditions, it is recommended that the slides be lubricated at least every 20,000 cycles, although this will depend greatly on the actual conditions and atmosphere of the application.

In critical working conditions, the slides must be lubricated more frequently.

Before lubrication, the slides must be cleaned free of dirt and debris. With the slide open, spread a sufficient amount of medium consistency lithium grease on the races between the inner and outer beams and then in the space between the ball bearings.

When used in aggressive conditions (humidity, dust, abrasive materials, etc.), ensure regular maintenance with complete cleaning of the telescopic slides followed by lubrication.

Der Beitrag Telescopic slide full extension TSR-90 | up to 690 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Article price and sale per piece

Article No. Schock 016.06330Z – 016.06339Z

Telescopic slides series 016, hot-dip galvanized steel, width 9,5 mm, partial extension, separable, up to 56 kg at 100.000 cycles

Description:

• Partial extension
• Load capacity up to 56 kg per pair
• End stop closed
• Force-locking latch open
• Separable inner rail

Material:

• Rails made of galvanized and blue passivated steel
• Ball cages made of galvanized steel
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature 10 C to 40 C
• Storage and transport temperature -20 C to max. 80 C

Notes: The end stop stops the ball guide in the closed position. The force locking detent fixes the guide with defined force in the open position. The separable inner rail allows the inner rail profile to be released by operating a latch. This allows separate mounting of the inner rail to the movable module. The specified load capacities are maximum values for a vertically mounted pair of telescopic rails with even load distribution when using all provided mounting positions.

Der Beitrag Telescopic slide partial extension 016 | up to 65 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.