Der Beitrag Telescopic slide over-extension 042 | up to 12 kg | length 246 mm | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Item price and sale per piece

Telescopic slides Series 010, hot-dip galvanized steel, width 10 mm , partial extension with center detent

• Partial extension slide
• Load capacity up to 15 kg per pair
• Extendable on both sides with center detent
• Length: 340 mm
• Pull-out travel: 260 mm on both sides
• Hole pattern outer rail: 2 x M4 thread (58 – 224 mm)
• Hole pattern inner rail: 3 x hole D 6 mm (42 – 128 – 128 mm)

Material:

• Rails made of hot-dip galvanized steel
• Ball cages made of plastic
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature 10 C to 40 C (50 F to 104 F)
• Storage and transport temperature -20 C to max. 80 C (50 F to 176 F)

Notes: The center detent fixes extendable runners on both sides in closed position. The indicated load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all provided mounting positions. Mounting vertically with side recesses on the drawer front or horizontally with shadow gap under the drawer. The load capacity for horizontal mounting is approx. 60% less than for vertical mounting.

Der Beitrag Telescopic slide partial extension 010 | up to 25 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Item price and sale per piece

Telescopic slides Series 010, hot-dip galvanized steel, width 10 mm, partial extension with center detent

• Partial extension slide
• Load capacity up to 15 kg per pair
• Extendable on both sides with center detent
• Length: 402 mm
• Extension path: 292 mm on both sides
• Hole pattern outer rail: 2 x countersunk hole 90 D 5.1 x 7.4 mm (10 – 360 mm)
• Hole pattern inner rail: 2 x countersunk hole 90 D 5.1 x 7.4 mm (5 – 391.5 mm)

Material:

• Rails made of hot-dip galvanized steel
• Ball cages made of plastic
• Balls made of hardened carbon steel

Temperature range:

• Operating temperature 10 C to 40 C
• Storage and transport temperature -20 C to max. 80 C

Notes:The center detent fixes extendable guides on both sides in closed position.The indicated load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all provided mounting positions.Mounting vertically with side recesses on the drawer front or horizontally with shadow gap under the drawer. The load capacity for horizontal mounting is approx. 60% less than for vertical mounting.

Der Beitrag Telescopic slide partial extension 010 | up to 25 kg | Length 402 mm | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Item price and sale per piece

Schock standard program: Article No. 040.17474

Article group: Telescopic slide series 040, steel, width 20 mm, over-extension, up to 20 kg at 100.000 cycles

Description:

• Full extension with over-extension
• Load capacity up to 30 kg per pair
• Extendable on both sides

Material: Slides made of hot-dip galvanized steel Ball cages made of plastic Balls made of hardened carbon steel Temperature range: Operating temperature 10 C to 40 CStorage and transport temperature -20 C to max. 80 C Notes: Telescopic slides extendable on both sides are suitable for different drawer depths. The specified load capacities are maximum values for a vertically mounted pair of telescopic slides with even load distribution when using all provided mounting positions.

Der Beitrag Telescopic slide over extension 040 | up to 30 kg | length 310 mm | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

Functions:

• Extendable on both sides

Schock telescopic slide Partial extension Series 017

The Schock telescopic slide Partial extension Series 017 is the ideal solution for a wide range
of applications where ease of use and seamless accessibility
are essential.

With dimensions of 10.0 x 17.0 mm (w/h) and available lengths from 182 mm to 374 mm,
they offer exceptional flexibility and adaptability for various projects.

These Partial extensions come with a useful function,
extendable on both sides.

These functions not only ensure safe handling but also provide
comfortable and reliable use.

The Schock Partial extension telescopic slides of Series 017 are versatile,
as they are suitable for both vertical and horizontal mounting. This enables
their seamless integration into a wide range of projects.

Technical Data:

• Load capacity up to 15 kg/pair at 10,000 cycles

Material:

• Rails made of galvanized steel (ZM100)
• Ball cages made of galvanized steel (ZM70)
• Balls made of hardened C-steel

Temperature Range:

• Operating temperature: -20 C to +70 C
• Operating temperature with Soft-Close: +10 C to +40 C

Notes:

The specified load capacities are maximum values for a vertically mounted
telescopic slide pair with even load distribution using all designated
mounting positions.

WARNING: In case of flat mounting , the load capacity is reduced by up to 75%.

Der Beitrag Telescopic slide partial extension Series 017 | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

The telescopic slides of the ADTSB series offer extension in both directions.
Due to the construction of the guide elements from solid material, the slides can be manufactured in almost any desired aluminum.

Extension: 100%, extendable on both sides
Material: Aluminum EN-AW 6082 T6
Length: 200 mm to 2000 mm
Cross-section: 32 x 70 mm
Extension length: 200 mm to 2000 mm
Load capacity: up to 330 kg/pair
Operating temperature: -40 to +200 C

The aluminum telescopic slides of the ADTSB series are smooth and precise full-extension slides.
Due to their light weight, the slides are ideal for military and airborne applications. Additionally, the slides are used for defense applications at sea and in the air.
With anodized surfaces and the use of stainless steel bearings, cages, and end stops, the slides are corrosion-resistant. Additional surface finishes can be selected upon request.
The ADTSB telescopic slides are limited to operating speeds of <0.3m/s. Therefore, we do not recommend these telescopic slides for precise robotic pick-and-place or high-speed shuttles.

Load Capacities:
The telescopic slides offer high load capacity and compact dimensions. The maximum load capacity is specified for fully extended slide pairs installed in the main axis direction and whose load is evenly distributed over the inner slide.

Note:
As these telescopic slides are custom-made to order, they are excluded from returns. The slides are secured with high-quality wooden packaging during transport.

Der Beitrag Telescopic slide full extension ADTSB-70 | up to 330 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

The telescopic slides of the ADTSB series offer extension in both directions.
Due to the construction of the guide elements from solid material, the slides can be manufactured in almost any desired aluminum.

Extension: 100%, extendable on both sides
Material: Aluminum EN-AW 6082 T6
Length: 200 mm to 1600 mm
Cross-section: 30 x 50 mm
Extension length: 200 mm to 1600 mm
Load capacity: up to 180 kg/pair
Operating temperature: -40 to +200 C

The aluminum telescopic slides of the ADTSB series are smooth and precise full-extension slides.
Due to their light weight, the slides are ideal for military and airborne applications.
With anodized surfaces and the use of stainless steel bearings, cages, and end stops, the slides are corrosion-resistant. Additional surface finishes can be selected upon request.
The ADTSB telescopic slides are limited to operating speeds of <0.3m/s. Therefore, we do not recommend these telescopic slides for precise robotic pick-and-place or high-speed shuttles.

Load Capacities:
The telescopic slides offer high load capacity and compact dimensions. The maximum load capacity is specified for fully extended slide pairs installed in the main axis direction and whose load is evenly distributed over the inner slide.

Note:
As these telescopic slides are custom-made to order, they are excluded from returns. The slides are secured with high-quality wooden packaging during transport.

Der Beitrag Telescopic slide full extension ADTSB-50 | up to 180 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

This is a high quality, smooth, full extension slide with milled ball tracks for accuracy and a slight pre-load. There is a choice of surface finishes available. The bearings, cages and end stops are stainless steel, providing a corrosion resistant slide.

The low weight ADTSB-40 slide has a loading of 125kg at 600mm. The slide is designed for full travel front and rear. This is facilitated by an internal rocker system which holds and releases beams in sequence. The first beam will extend fully and only at that point will the second beam be released.

We do not recommend standard ADTSB slides on accurate robotic pick & place or high speed shuttles, without factory adaptation and customer in situ testing, prior to committing to production. The slides are limited to operational speeds of <0.3m/s.

Strengthened by the mobile I beam which allows a very compact design to be used on applications such as aircraft seating and bi-directional drawers where normally only a two-beam slide would fit. Supplied with a standard anodization. Please consult our engineers for other surface finishes available. A single ADTSB-40 weighs 2.23kg per metre.

Der Beitrag Telescopic slide full extension ADTSB-40 | up to 125 kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

The DTSB-120 offers full extension both forward and backward. This is enabled by an internal rocking mechanism that releases each beam one after the other. Ideal for drawers where access may be restricted from both sides.
This is a telescopic slide with full extension for heavy loads, suitable for a variety of applications.

Extension: 100%, extendable on both sides
Material: Steel C45 E + C
Length: 200 mm to 2000 mm
Cross-section: 44 x 120 mm
Extension length: 200 mm to 2000 mm
Load capacity: up to 1890 kg/pair
Operating temperature: -40 to +200 C

Slides made of cold-drawn steel profiles with machined ball tracks offer excellent shock and vibration resistance. Accordingly, the product is well-suited for supporting emergency truck drawers and train seats.

Due to the extreme strength of the movable I-beam, this slide is robust against applied loads in the extended state, making it an excellent choice for dynamic applications. No plastic parts are used in the manufacturing of this series, making it ideal for use in high-temperature environments.

The slides are made of cold-drawn steel C45E+C according to EN 10277. The standard ball cages are made of galvanized sheet metal, and the ball bearings are made of carbon steel C85 G100 according to DIN 5401.

Load Capacities:
The telescopic slides offer high load capacity and compact dimensions. The maximum load capacity is specified for fully extended slide pairs installed in the main axis direction with the load evenly distributed over the inner slide.

Note:
As these telescopic slides are custom-made to order, they are excluded from returns. The slides are secured with high-quality wooden packaging during transport.

Der Beitrag Telescopic slide full extension DTSB-120 | up to 1890kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.

The DTSB-110 offers full extension both forward and backward. This is enabled by an internal rocking mechanism that releases each beam one after the other. Ideal for drawers where access may be restricted from both sides.
This is a telescopic slide with full extension for heavy loads, suitable for a variety of applications.

Extension: 100%, extendable on both sides
Material: Steel C45 E + C
Length: 200 mm to 2000 mm
Cross-section: 44 x 110 mm
Extension length: 200 mm to 2000 mm
Load capacity: up to 1650 kg/pair
Operating temperature: -40 to +200 C

Slides made of cold-drawn steel profiles with machined ball tracks offer excellent shock and vibration resistance. Accordingly, the product is well-suited for supporting emergency truck drawers and train seats.

Due to the extreme strength of the movable I-beam, this slide is robust against applied loads in the extended state, making it an excellent choice for dynamic applications. No plastic parts are used in the manufacturing of this series, making it ideal for use in high-temperature environments.

The slides are made of cold-drawn steel C45E+C according to EN 10277. The standard ball cages are made of galvanized sheet metal, and the ball bearings are made of carbon steel C85 G100 according to DIN 5401.

Load Capacities:
The telescopic slides offer high load capacity and compact dimensions. The maximum load capacity is specified for fully extended slide pairs installed in the main axis direction with the load evenly distributed over the inner slide.

Note:
As these telescopic slides are custom-made to order, they are excluded from returns. The slides are secured with high-quality wooden packaging during transport.

Der Beitrag Telescopic slide full extension DTSB-110 | up to 1800kg | Schock telescopic slides erschien zuerst auf SCHOCK Telescopic slides.